BASIC METHOD 1) Place Laminate/waterproof material onto a piece of newspaper. 2) Squeeze out a pea-sized amount of ink (water-based) onto the laminate and spread with the roller. If there is too much ink on the laminate then it will make a louder noise, the ideal amount of ink on the laminate corresponds to a quieter , sticky-sounding noise. 3) Roll out the ink from the laminate and onto a glass plate. 4) Lift up the plate and fold the newspaper in half, this will prevent excess marks around the laminate being printed as well. 4) Place the sheet of paper over the plate and use the hand baron to press the paper down, to create a crisper print and more solid a colour print. 5) Remove the paper from the plate and the ink will have left a print. TECHNIQUE Make sure there is enough ink on the plate to create a quality print, I made the mistake initially of being very cautious of the amount I was putting down, but found that a little more than the recommended was good for...
Art in the Park is a festival based in Leamington-Spa to celebrate art and music over the duration of a weekend. I decided to go along on the Saturday to collect some inspiration for my coursework. There were lots of stalls and people selling artwork, so I was able to collect business cards and have conversations with these people and learn new things about their creative process.
Comments
Post a Comment